The method of programming key for Peugeot 308 is the same as for Citroen.Both of them need pin code when programming key.And remote 433Hz,ID46 chip,the remote function will generate automatically when completing program.Here i share the guide on How to program key for Peugeot 308 2015 by SKP1000 and VVDI2.
OBD2 socket location
Step 1:Get the pin code
There are 3 method to get the Peugeot 308 immo pin code.
1. Consult dealer or original pin code car.
2. Caculate the data read out from ECU or BSI.
3. Read out the pin code directly by device.
Here I show the how to read out the pin code by device.
Select “Read pin code”,then it will remind you to turn on the ignition.
Above pic show the pin code read out by VVDI2.
Step 2:Program Key by SKP1000 Key Programmer
Enter the Menu and select “Peugeot”-->Select “Classify by vehicle model”
SKP1000 show info: Connect via OBD2 socket and turn on the ignition.
Enter the pin code read out by VVDI2 “B6H0”
Pls turn off the ignition and then turn on it again,then press [YES] to continue.
Note:The remote function is generated automatically.If you find the key you program do not work,perform below operations:
1 Inset the key that can not work
2 Turn key to the “ON” position
3 Press the lock button twice.
No comments:
Post a Comment