SKP1000 Program Smart Key For Nissan Qashqai & X-TRAIL

In this article i will share the easy step by step guide on How to use SKP1000 program smart key for Nissan Qashqai & X-TRAIL.

Vehicle info:

The method of programming key for Nissan Qashqai is the same as X-TRAIL.Here I take the programming smart key for X-TRAIL as a example.If you get the skill of one of them,both you will.

Nissan X-TRAIL immo BCM equipped with 20 digits changing immo code.The smart key is specialist for Nissan X-TRIL,it has 2 button,315Hz.





Procedures:

Enter the menus and select “Nissan”-->Select”Nissan X-TRIL Smart key after 2013”

Plug the SKP1000 Key Programmer to OBD2 socket of Nissan X-TRIL and then click “Continue”

Select “Smart Key System (No need pin code)”


Select “Smart Key Programming”

Programming...pls wait

Turn off “Ignition”
Turn on “Emergency button”
All keys will be Delete
You can program up to 4 smart keys.

Press “Emergency button”

Press “Start button”,and close smart key to the “start button” within 5 seconds.
Press “Start button”,dashboard light on ,and immo light flash 5 times
Press [YES] to continue.

You must wait dash light on,otherwise do not program.And at beginning of first key programming,you need to use original key.If smart key programmed successfully,the immo light wil off,otherwise it means the key type is incorrectly,you need to press the “start button” by original key.



System configuring....

Programming successfully,press [YES] to program for next one,[NO] back

Turn off ”Ignition”,and wait for 5 seconds.


Press “Start button”,and close smart key to the “start button” within 5 seconds.
Press “Start button”,dashboard light on ,and immo light flash 5 times
Press [YES] to continue.

Press “start button”,close the first smart key to the “start button”
The buzzer will ringing continuously,programming completely.