Here share guide on How to program smart key for SUZUKI S-Cross by SKP1000.When you programming smart key for SUZUKI S-Cross,you need to read out ID.
According to the programming conditions,it divide into two type:
1.You have work able smart card
2.You don’t have work able smart card(all key lost)
For all key lost:
This step is the most important in the progress,and you must finish this step for next operation.And in order to get the PIN,we need to get the ID and VIN before,but if you want to read out the ID,the dashboard must be light on.So there we need to light on the dash without the smart card. Connect the 12 power to the IG1 and SIG 7.5A in the fuse box which near the your left foot at driver side.
After light on the dash,you was able to read out the ID by SKP1000,and the next operations is the same as the operation of situation 1(You have work able smart card)
After reading out the ID,use SKP1000 Key Programmer to read out PIN.And the follow the screen to input the PIN to program.
It will delete all smart key before,and you need to program all keys you want.
And the screen will show you need to close the smart key on the start button,but do not press it.
If you press the start button,the dash will off,and then you need connect the 12 power to the IG1 and SIG 7.5A in the fuse box which near the your left foot at driver side.(just as all key lost)
For programming of next smart key,click [YES]
For more vehicle key programmer,you can visit this website:
No comments:
Post a Comment