Ford Fiesta 2013 equipped with new Ford immobilizer system,when you program new key it need to enter pin code.But it performed programming by SKP1000 Key programmer without pin code.(It will calculate pin code automatically )
Vehicle model:Ford Fiesta 2013
The location of OBD2 socket
Enter the menu to select “Ford Fiesta 2013”
Select “No need pin code” to program
Select “Immobilizer system”
Turn the ignition to “ON” position,press [YES] to continue
VIN code:LVRHFADL2EN560905
PN:C1BT-10849-LCG
Press [YES] to continue.
You will see 3 options:
#1 Add new key
#2 Delete key
#3 All key lost (Perform this option need 2 keys at least)
Here we choice second option to add new key.
Insert the new key to ignition and turn to “ON” position,then you just wait for programming completely by SKP1000.
Remote function programming:
1.Insert the key to ignition then turn it to “ON” position,then turn to “Off” position.
Repeat below operation 4 times within 6 seconds,keep it on the “Off” position at last time.
2.Keep pressing the “Lock” and ”unlock” button at same time until you sound a sound from controller,release the two button.Repeat operation:Keep pressing the “Lock” and ”unlock” button at same time until you sound a sound from controller,release the two button within 10 seconds.
3.Turn key to “ON” position,the dashboard lights will light on ,wait for about 10 seconds,the turn off ignition and pull out key.
Done!
No comments:
Post a Comment