Note:SKP1000 is English version of CI-600 (Chinese version)
Procedures:
Power up the SKP1000-->Enter the menus-->Select “Honda”-->Select “classify by system”
Select “Smart key system 2”
Connect SKP1000 to Vehicle OBD2 Socket and Turn the ignition key to “ON” position,press [YES] to continue.
Select “Smart Key All key lost”
Bring all smart key out of cab.
Press the start button,if you can start the engine then press [YES],otherwise press [NO]
Here can not start the engine,press [NO]
Keep pressing the start button all the time and press the [YES] until dashboard light on.
Check if the ignition locate “ON” position,press [YES] to continue.
Here enter the number of smart key you want to program.
Turn the ignition to “Off” position
Turn ignition to “ON” position again within 15 seconds.
Check the indicator lamp sate: OFF press [YES],ON press [NO]
Usually indicator lamp will light off,then turn off ignition
Then turn on the ignition again within 15 seconds.
Smart key register completely.
Test the new smart key.
No comments:
Post a Comment